RelentlessImp Posted August 31, 2021 Share Posted August 31, 2021 Patching _BWRHD.DLG: HAERD25J => HAERDAJ - dlg; 156 => 1106 - state Adding _BWRHD to internal list of available DLGs [_BWRHD.DLG] saved 8 states, 8 trans, 1 strig, 0 ttrig, 1 actions override/_BWRHD.DLG copied to EET_end/backup/0/_BWRHD.DLG, 567 bytes Copied [_BWRHD.DLG] to [override/_BWRHD.DLG] Copying and patching 12353 files ... [./override/!SARAD1.BCS] loaded, 16403 bytes [./override/!SARAD2.BCS] loaded, 15422 bytes [./override/!SARAD3.BCS] loaded, 1064 bytes [./override/!SPCCON.BCS] loaded, 1800 bytes [./override/#IWD_WTA.BCS] loaded, 325 bytes [./override/#LFFGEN.BCS] loaded, 1083 bytes [./override/#LF_CH6.BCS] loaded, 1080 bytes [./override/#LF_CH7.BCS] loaded, 1089 bytes [./override/#LF_WEB1.BCS] loaded, 463 bytes [./override/#LPCROOM.BCS] loaded, 4247 bytes ERROR: cannot resolve trigger 0x40e0 ERROR: [#LPCROOM.BCS] -> [override/#LPCROOM.BCS] Patching Failed (COPY) (Not_found) Stopping installation because of error. Weidu.log:https://pastebin.com/2PpajUcN Quote Link to comment
Graion Dilach Posted August 31, 2021 Share Posted August 31, 2021 Feels like Transitions and EndlessBG1 comes way too late in your install order. I always put them as early as possible (atleast predating the other BG1 quest mods). I don't see anything really glaring otherwise. Quote Link to comment
jastey Posted August 31, 2021 Share Posted August 31, 2021 Yes, Transitions and EndlessBG1 should be early in the install order. It's well possible this will solve the error which is caused by a file of I'd assume Transitions @Lauriel? Also, Crossmod Banter Pack preferably after any NPC mods (Solaufein e.g.) or you'll lose on banter between the NPCs. Thank you for using the original versions of Iylos and Arath, much appreciated. Quote Link to comment
Lauriel Posted August 31, 2021 Share Posted August 31, 2021 2 hours ago, RelentlessImp said: ERROR: [#LPCROOM.BCS] -> [override/#LPCROOM.BCS] Patching Failed (COPY) (Not_found) Looks like you're missing a file. Please download the zip file again. Quote Link to comment
RelentlessImp Posted September 1, 2021 Author Share Posted September 1, 2021 8 hours ago, jastey said: Thank you for using the original versions of Iylos and Arath, much appreciated. Yeah, I'm rejecting the EE Install Tool entirely; even if I was using the original versions as much as possible even with that (and what a pain it is to make it use different versions of the mods), I don't want any taint of Roxanne on my new install. I've been using Project Infinity and being guided by its categories, so... I guess Transitions and EndlessBG1 should go at the top of the quest category? Quote Link to comment
RelentlessImp Posted September 1, 2021 Author Share Posted September 1, 2021 (edited) 7 hours ago, Lauriel said: Looks like you're missing a file. Please download the zip file again. A file from which mod though? Or is it just part of the EET package? Edited September 1, 2021 by RelentlessImp Quote Link to comment
Lauriel Posted September 1, 2021 Share Posted September 1, 2021 2 minutes ago, RelentlessImp said: A file from which mod though? Or is it just part of the EET package? Oh, I'm sorry. Transitions. Quote Link to comment
RelentlessImp Posted September 1, 2021 Author Share Posted September 1, 2021 Gotcha. I'll give that a go. I'm gonna attempt a manual megamod install this time and get a fresh download and run it early as I can, then. Quote Link to comment
Lauriel Posted September 1, 2021 Share Posted September 1, 2021 4 minutes ago, RelentlessImp said: Gotcha. I'll give that a go. I'm gonna attempt a manual megamod install this time and get a fresh download and run it early as I can, then. If you'll be installing EndlessBG1 as well, Transitions needs to go AFTER EndlessBG1. They're compatible, but only in that order. Quote Link to comment
jastey Posted September 1, 2021 Share Posted September 1, 2021 2 hours ago, RelentlessImp said: Transitions and EndlessBG1 should go at the top of the quest category? Yes, I would recommend installing them before BST in your order, and then EndlessBG1 first, Transitions second as @Lauriel already posted. There is a new discussion about EET instal order with some linked (although maybe slightly outdated) installs of other people here in case you want to check some of your other mods as well. Quote Link to comment
RelentlessImp Posted September 3, 2021 Author Share Posted September 3, 2021 (edited) Okay, so, I redownloaded Transitions, and attempted a new install with EndlessBG1 and Transitions high up in the load order and... same problem. Patching _BWRHD.DLG: HAERD25J => HAERDAJ - dlg; 156 => 1110 - state Adding _BWRHD to internal list of available DLGs [_BWRHD.DLG] saved 8 states, 8 trans, 1 strig, 0 ttrig, 1 actions override/_BWRHD.DLG copied to EET_end/backup/0/_BWRHD.DLG, 567 bytes Copied [_BWRHD.DLG] to [override/_BWRHD.DLG] Copying and patching 12422 files ... [./override/!SARAD1.BCS] loaded, 16403 bytes [./override/!SARAD2.BCS] loaded, 15422 bytes [./override/!SARAD3.BCS] loaded, 1064 bytes [./override/!SPCCON.BCS] loaded, 1800 bytes [./override/#IWD_WTA.BCS] loaded, 325 bytes [./override/#LFFGEN.BCS] loaded, 1083 bytes [./override/#LF_CH6.BCS] loaded, 1080 bytes [./override/#LF_CH7.BCS] loaded, 1089 bytes [./override/#LF_WEB1.BCS] loaded, 463 bytes [./override/#LPCROOM.BCS] loaded, 4247 bytes ERROR: cannot resolve trigger 0x40e0 ERROR: [#LPCROOM.BCS] -> [override/#LPCROOM.BCS] Patching Failed (COPY) (Not_found) Stopping installation because of error. I've looked through the GitHub for Transitions, as well as downloads of various versions, and I can't find #LPCROOM.BCS in any of them. So is the file just missing from the install entirely? There's an #LPCROOM.baf, but no .bcs. EDIT: I found an #LPCROOM.bcs in my override folder EDIT2: Ripping #LPCROOM.bcs out of my Override folder and attempting it again allowed EET_End to go further, but then... Patching _BWRHD.DLG: HAERD25J => HAERDAJ - dlg; 156 => 1110 - state Adding _BWRHD to internal list of available DLGs [_BWRHD.DLG] saved 8 states, 8 trans, 1 strig, 0 ttrig, 1 actions override/_BWRHD.DLG copied to EET_end/backup/0/_BWRHD.DLG, 567 bytes Copied [_BWRHD.DLG] to [override/_BWRHD.DLG] Copying and patching 12421 files ... [./override/!SARAD1.BCS] loaded, 16403 bytes [./override/!SARAD2.BCS] loaded, 15422 bytes [./override/!SARAD3.BCS] loaded, 1064 bytes [./override/!SPCCON.BCS] loaded, 1800 bytes [./override/#IWD_WTA.BCS] loaded, 325 bytes [./override/#LFFGEN.BCS] loaded, 1083 bytes [./override/#LF_CH6.BCS] loaded, 1080 bytes [./override/#LF_CH7.BCS] loaded, 1089 bytes [./override/#LF_WEB1.BCS] loaded, 463 bytes [./override/#LSRVGEN.BCS] loaded, 883 bytes [./override/#LWINSKI.BCS] loaded, 2661 bytes [./override/#L_CUT04.BCS] loaded, 6221 bytes [./override/#L_CUT05.BCS] loaded, 29644 bytes [./override/#L_CUT07.BCS] loaded, 7059 bytes [./override/#L_CUT09.BCS] loaded, 30768 bytes [./override/SONGLIST.IDS] loaded, 1951 bytes [./override/#L_SKIP.BCS] loaded, 3115 bytes ERROR: cannot resolve trigger 0xeb ERROR: [#L_SKIP.BCS] -> [override/#L_SKIP.BCS] Patching Failed (COPY) (Not_found) Stopping installation because of error. Edited September 3, 2021 by RelentlessImp Quote Link to comment
Lauriel Posted September 3, 2021 Share Posted September 3, 2021 (edited) Is this by any chance on a linux system? 1 hour ago, RelentlessImp said: ERROR: cannot resolve trigger 0xeb ERROR: [#L_SKIP.BCS] -> [override/#L_SKIP.BCS] Patching Failed (COPY) (Not_found) The only trigger in that file is IF CutSceneBroken(). There's no reason EET would have an issue with it. So it must the file itself. Which, if this is linux and I didn't copy the BAF to the BCS with the upper case file extension, it would probably have issues. There's a external program that can be run against the files to bring them into the correct case. Edited September 3, 2021 by Lauriel Quote Link to comment
RelentlessImp Posted September 3, 2021 Author Share Posted September 3, 2021 12 minutes ago, Lauriel said: Is this by any chance on a linux system? Windows 10. Quote Link to comment
Lauriel Posted September 3, 2021 Share Posted September 3, 2021 I'm out of ideas then. I'm very sorry, but you should probably just not install Transitions. Quote Link to comment
RelentlessImp Posted September 3, 2021 Author Share Posted September 3, 2021 Yeah, it certainly seems that way. I'm gonna rip it out of the install order. Quote Link to comment
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.