noone Posted December 16, 2011 Share Posted December 16, 2011 Hello. Clean installed IWD1+HoW+TotL then applied widescreen patch 3.05 and it didnt work. It is possible to set different resolutions, but 800x500 fails. Want 800x500 because i like big sprites and have a small monitor. It did work very well in PST and BGT, obviously computer supports this resolution. This is .debug file : WeiDU v 22900 Log D:\Icewind Dale\setup-widescreen.exe [./CHITIN.KEY] loaded, 287467 bytes [./CHITIN.KEY] 268 BIFFs, 19992 resources [dialog.tlk] loaded, 3358595 bytes [dialog.tlk] 34502 string entries [./icewind.ini] loaded, 992 bytes Possible HD/CD Path: [d:\Icewind Dale\] Possible HD/CD Path: [d:\Icewind Dale\CD1\] Possible HD/CD Path: [d:\Icewind Dale\CD2\] Possible HD/CD Path: [d:\Icewind Dale\CD3\] [./Keymap.ini] loaded, 7605 bytes [./Language.ini] loaded, 24217 bytes [D:\Icewind Dale\setup-widescreen.exe] Using scripting style "IWD1" [dialog.tlk] claims to be writeable. [dialog.tlk] claims to be a regular file. Choose your language: 0 [English] 1 [Francais (Isaya & Lothringen)] 2 [spanish (ghildrean & Ancalagon el Negro)] 3 [Russian by Prowler & Njkzy (arcanecoast.ru)] 4 [italiano] Using Language [English] [English] has 1 top-level TRA files [widescreen/tra/english/setup.tra] has 31 translation strings Would you like to display the readme? [Y]es [N]o Install Component [Widescreen Mod]? [N]o, [Q]uit or choose one: 1] for the original Infinity Engine (CHOOSE THIS!) 2] for GemRB Uninstalling All Other Subcomponents of [Widescreen Mod] Done Uninstalling All Other Subcomponents of [Widescreen Mod] Installing [for the original Infinity Engine (CHOOSE THIS!)] [Widescreen Mod v3.02] Creating 1 directory BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/ARFILE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/ARFILE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/ARFILE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/ARFILE.BIF] [d:\Icewind Dale\/DATA/ARFILE.BIF] 1336016 bytes, 128 files, 0 tilesets BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/EARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/EARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/EARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/EARE.BIF] [d:\Icewind Dale\/DATA/EARE.BIF] 303460 bytes, 24 files, 0 tilesets BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/ZARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/ZARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/ZARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/ZARE.BIF] [d:\Icewind Dale\/DATA/ZARE.BIF] 331504 bytes, 21 files, 0 tilesets Enter your X coordinate. It should be a number, >= 640 (but not 641). User answer: "800" Enter your Y coordinate. It should be a number, >= 482. User answer: "500" 800 x 500. Are you sure? Y/N User answer: "y" Copying and patching 1 file ... [idmain.exe] loaded, 6873088 bytes idmain.exe copied to widescreen/backup/0/idmain.exe, 6873088 bytes Copied [idmain.exe] to [idmain.exe] Copying and patching 3 files ... BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/GUICHUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/GUICHUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/GUICHUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/GUICHUI.BIF] [d:\Icewind Dale\/DATA/GUICHUI.BIF] 122966 bytes, 22 files, 0 tilesets BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/EGUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/EGUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/EGUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/EGUI.BIF] [d:\Icewind Dale\/DATA/EGUI.BIF] 7869113 bytes, 54 files, 0 tilesets Copying 1 file ... ERROR locating resource for 'COPY' Resource [chuHori6_%0%.mos] not found in KEY file: [./chitin.key] Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. ERROR Installing [for the original Infinity Engine (CHOOSE THIS!)], rolling back to previous state [widescreen/backup/0/UNSETSTR.0] SET_STRING uninstall info not found Will uninstall 1 files for [WIDESCREEN/WIDESCREEN.TP2] component 0. Restoring backed-up [widescreen/backup/0/idmain.exe] widescreen/backup/0/idmain.exe copied to idmain.exe, 6873088 bytes Uninstalled 1 files for [WIDESCREEN/WIDESCREEN.TP2] component 0. Unable to Unlink [widescreen/backup/0/READLN.0]: Unix.Unix_error(20, "unlink", "widescreen/backup/0/READLN.0") Unable to Unlink [widescreen/backup/0/READLN.0.TEXT]: Unix.Unix_error(20, "unlink", "widescreen/backup/0/READLN.0.TEXT") ERROR: Failure("resource [chuHori6_%0%.mos] not found for 'COPY'") PLEASE post the contents of the file SETUP-WIDESCREEN.DEBUG to this forum: http://bit.ly/hf2XsG Using Language [English] [English] has 1 top-level TRA files [widescreen/tra/english/setup.tra] has 31 translation strings Install Component [Widescreen Mod]? [N]o, [Q]uit or choose one: 1] for the original Infinity Engine (CHOOSE THIS!) 2] for GemRB Already Asked About [Widescreen Mod] Saving This Log: NOT INSTALLED DUE TO ERRORS for the original Infinity Engine (CHOOSE THIS!) WeiDU Timings MKDIR 0.000 adding translation strings 0.000 unmarshal BIFF 0.000 OUTER_INNER_PATCH 0.000 READ_* 0.000 load TLK 0.000 Parsing TP2 files 0.000 LAUNCH_ACTION_MACRO 0.000 DEFINE_PATCH_MACRO 0.000 ACTION_PHP_EACH 0.000 DEFINE_ACTION_MACRO 0.000 parsing .tra files 0.000 OUTER_SET 0.000 parsing .log files 0.000 tp2 uninstall 0.000 OUTER_TEXT_SPRINT 0.000 INCLUDE 0.000 DEFINE_ACTION_FUNCTION 0.000 BUT_ONLY 0.000 DEFINE_PATCH_FUNCTION 0.000 saving files 0.015 COPY 0.016 ACTION_IF 0.016 unmarshal KEY 0.016 unmarshal TLK 0.031 Parsing TPA files 0.031 eval_pe 0.032 loading files 0.047 process_patch2 14.710 stuff not covered elsewhere 16.957 TOTAL 31.871 Link to comment
noone Posted December 16, 2011 Author Share Posted December 16, 2011 Log says that something is wrong with ./chitin.key i dont understand how game engine works, but thought it might be useful too upload this chitin.key so you could have a quick look without having to install the game. http://www.2shared.c...XYp/CHITIN.html Link to comment
Parnassus Posted December 19, 2011 Share Posted December 19, 2011 I have the same problem with IWD2 [C:\Games\Icewind Dale II\setup-widescreen.exe] WeiDU version 22900 [C:\Games\Icewind Dale II\setup-widescreen.exe] Using scripting style "IWD2" Choose your language: 0 [English] 1 [Francais (Isaya & Lothringen)] 2 [spanish (ghildrean & Ancalagon el Negro)] 3 [Russian by Prowler & Njkzy (arcanecoast.ru)] 4 [italiano] 0 Using Language [English]Would you like to display the readme? [Y]es [N]o y Install Component [Widescreen Mod]? [N]o, [Q]uit or choose one: 1] for the original Infinity Engine (CHOOSE THIS!) 2] for GemRB 2Installing [for GemRB] [Widescreen Mod v3.02] Creating 1 directory Enter your X coordinate. It should be a number, >= 800. 800Enter your Y coordinate. It should be a number, >= 600. 480 800 x 480.Are you sure? Y/N y Copying and patching 3 files ... Copying 1 file ... ERROR locating resource for 'COPY' Resource [chuHori6_%0%.mos] not found in KEY file: [./chitin.key] Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error.ERROR Installing [for GemRB], rolling back to previous state Will uninstall 0 files for [WIDESCREEN/WIDESCREEN.TP2] component 1. Uninstalled 0 files for [WIDESCREEN/WIDESCREEN.TP2] component 1. ERROR: Failure("resource [chuHori6_%0%.mos] not found for 'COPY'") PLEASE post the contents of the file SETUP-WIDESCREEN.DEBUG to this forum: http: //bit.ly/hf2XsG Using Language [English] Install Component [Widescreen Mod]? [N]o, [Q]uit or choose one: 1] for the original Infinity Engine (CHOOSE THIS!) 2] for GemRB Link to comment
Jarno Mikkola Posted December 20, 2011 Share Posted December 20, 2011 Enter your Y coordinate. It should be a number, >= 600.480 What's so hard to understand in the quote statement ? And you still try. The problem is obviously not the same... Link to comment
Parnassus Posted December 20, 2011 Share Posted December 20, 2011 Enter your Y coordinate. It should be a number, >= 600.480 What's so hard to understand in the quote statement ? And you still try. The problem is obviously not the same... According to the readme it specifically states that there's different limits for different games and that IWD2 can run down to 480. Hence I tried. Link to comment
Jarno Mikkola Posted December 20, 2011 Share Posted December 20, 2011 According to the readme it specifically states that there's different limits for different games and that IWD2 can run down to 480. Hence I tried. Well without remaking the interface completely, you cannot have the GUI be smaller than the x600 ... you could figure that the readme is wrong. Link to comment
noone Posted December 23, 2011 Author Share Posted December 23, 2011 So what about IWD 1 ? It does support native 640x480 so it should be possible to make widescreen work at low resolutions, theoretically. Maybe this issue is worth looking into, to make widescreen mod even better ? For future generations, you know... Link to comment
Jarno Mikkola Posted December 24, 2011 Share Posted December 24, 2011 So what about IWD 1 ?It does support native 640x480 so it should be possible to make widescreen work at low resolutions, theoretically. Maybe this issue is worth looking into, to make widescreen mod even better ? For future generations, you know... Try using the latest WeiDU.exe as the setup-widescreen.exe from here. Link to comment
noone Posted December 24, 2011 Author Share Posted December 24, 2011 Try using the latest WeiDU.exe as the setup-widescreen.exe from here. Sorry, i dont understand what do you mean and how to do it.. Link to comment
Jarno Mikkola Posted December 24, 2011 Share Posted December 24, 2011 Try using the latest WeiDU.exe as the setup-widescreen.exe from here.Sorry, i dont understand what do you mean and how to do it.. Well, you go to the link, download the Windows Binary Archive file(.zip), and extract it to a folder, then you go to that folder copy the WeiDU.exe in it to the game folder and rename as "setup-widescreen.exe" and run that. Link to comment
noone Posted December 24, 2011 Author Share Posted December 24, 2011 No difference. WeiDU v 23100 Log D:\Icewind Dale\setup-widescreen.exe [./CHITIN.KEY] loaded, 287467 bytes [./CHITIN.KEY] 268 BIFFs, 19992 resources [dialog.tlk] loaded, 3358595 bytes [dialog.tlk] 34502 string entries [./icewind.ini] loaded, 992 bytes Possible HD/CD Path: [d:\Icewind Dale\] Possible HD/CD Path: [d:\Icewind Dale\CD1\] Possible HD/CD Path: [d:\Icewind Dale\CD2\] Possible HD/CD Path: [d:\Icewind Dale\CD3\] [./Keymap.ini] loaded, 7605 bytes [./Language.ini] loaded, 24217 bytes [D:\Icewind Dale\setup-widescreen.exe] Using scripting style "IWD1" [dialog.tlk] claims to be writeable. [dialog.tlk] claims to be a regular file. Choose your language: 0 [English] 1 [Francais (Isaya & Lothringen)] 2 [spanish (ghildrean & Ancalagon el Negro)] 3 [Russian by Prowler & Njkzy (arcanecoast.ru)] 4 [italiano] Using Language [English] [English] has 1 top-level TRA files [widescreen/tra/english/setup.tra] has 31 translation strings Would you like to display the readme? [Y]es [N]o Install Component [Widescreen Mod]? [N]o, [Q]uit or choose one: 1] for the original Infinity Engine (CHOOSE THIS!) 2] for GemRB Uninstalling All Other Subcomponents of [Widescreen Mod] Done Uninstalling All Other Subcomponents of [Widescreen Mod] Installing [for the original Infinity Engine (CHOOSE THIS!)] [Widescreen Mod v3.02] Creating 1 directory BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/ARFILE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/ARFILE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/ARFILE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/ARFILE.BIF] [d:\Icewind Dale\/DATA/ARFILE.BIF] 1336016 bytes, 128 files, 0 tilesets BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/EARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/EARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/EARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/EARE.BIF] [d:\Icewind Dale\/DATA/EARE.BIF] 303460 bytes, 24 files, 0 tilesets BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/ZARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/ZARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/ZARE.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/ZARE.BIF] [d:\Icewind Dale\/DATA/ZARE.BIF] 331504 bytes, 21 files, 0 tilesets Enter your X coordinate. It should be a number, >= 640 (but not 641). User answer: "800" Enter your Y coordinate. It should be a number, >= 482. User answer: "500" 800 x 500. Are you sure? Y/N User answer: "y" Copying and patching 1 file ... [idmain.exe] loaded, 6873088 bytes idmain.exe copied to widescreen/backup/0/idmain.exe, 6873088 bytes Copied [idmain.exe] to [idmain.exe] Copying and patching 3 files ... BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/GUICHUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/GUICHUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/GUICHUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/GUICHUI.BIF] [d:\Icewind Dale\/DATA/GUICHUI.BIF] 122966 bytes, 22 files, 0 tilesets BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD3\/DATA/EGUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD2\/DATA/EGUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\CD1\/DATA/EGUI.BIF] BIFF may be in hard-drive CD-path [d:\Icewind Dale\/DATA/EGUI.BIF] [d:\Icewind Dale\/DATA/EGUI.BIF] 7869113 bytes, 54 files, 0 tilesets Copying 1 file ... ERROR locating resource for 'COPY' Resource [chuHori6_%0%.mos] not found in KEY file: [./chitin.key] Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. Stopping installation because of error. ERROR Installing [for the original Infinity Engine (CHOOSE THIS!)], rolling back to previous state Unable to Unlink [widescreen/backup/0/OTHER.0]: Unix.Unix_error(1, "unlink", "widescreen/backup/0/OTHER.0") [widescreen/backup/0/UNSETSTR.0] SET_STRING uninstall info not found Will uninstall 1 files for [WIDESCREEN/WIDESCREEN.TP2] component 0. Restoring backed-up [widescreen/backup/0/idmain.exe] widescreen/backup/0/idmain.exe copied to idmain.exe, 6873088 bytes Uninstalled 1 files for [WIDESCREEN/WIDESCREEN.TP2] component 0. Unable to Unlink [widescreen/backup/0/READLN.0]: Unix.Unix_error(20, "unlink", "widescreen/backup/0/READLN.0") Unable to Unlink [widescreen/backup/0/READLN.0.TEXT]: Unix.Unix_error(20, "unlink", "widescreen/backup/0/READLN.0.TEXT") ERROR: Failure("resource [chuHori6_%0%.mos] not found for 'COPY'") PLEASE post the contents of the file SETUP-WIDESCREEN.DEBUG to this forum: http://bit.ly/hf2XsG Using Language [English] [English] has 1 top-level TRA files [widescreen/tra/english/setup.tra] has 31 translation strings Install Component [Widescreen Mod]? [N]o, [Q]uit or choose one: 1] for the original Infinity Engine (CHOOSE THIS!) 2] for GemRB Already Asked About [Widescreen Mod] Saving This Log: NOT INSTALLED DUE TO ERRORS for the original Infinity Engine (CHOOSE THIS!) WeiDU Timings MKDIR 0.000 adding translation strings 0.000 unmarshal BIFF 0.000 OUTER_INNER_PATCH 0.000 load TLK 0.000 LAUNCH_ACTION_MACRO 0.000 DEFINE_PATCH_MACRO 0.000 ACTION_PHP_EACH 0.000 DEFINE_ACTION_MACRO 0.000 OUTER_INNER_PATCH_SAVE 0.000 parsing .tra files 0.000 OUTER_SET 0.000 parsing .log files 0.000 tp2 uninstall 0.000 OUTER_TEXT_SPRINT 0.000 DEFINE_ACTION_FUNCTION 0.000 BUT_ONLY 0.000 DEFINE_PATCH_FUNCTION 0.000 ACTION_IF 0.015 INCLUDE 0.016 saving files 0.016 unmarshal KEY 0.031 Parsing TP2 files 0.031 unmarshal TLK 0.032 READ_* 0.047 Parsing TPA files 0.109 eval_pe 0.172 COPY 0.407 loading files 0.468 process_patch2 15.021 stuff not covered elsewhere 39.655 TOTAL 56.020 Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.